Shinko DCL-33A is a compact DIN rail mount PID controller that can be configured to function as a signal transmitter (DCL-33A-A/M model). It is suited for panel installation where space is limited.
Input
Thermocouples (+/-0.2% of input span +/- 1 digit). RTD (+/-0.1% of input span +/- d1digit. DC current and voltage (+/- 0.2% of input span +/- 1 digit)
Sampling Period
125 ms
Control Action
As trasnmitter (DCL-33A-A/M model), Auto-tune PID, PI, PD, P, On/Off
Control Output
Relay contact, 12VDC for SSR drive, DC mA current
Supply Voltage
100 .. 240 VAC (50/60Hz), 24 VDC / VAC (50/60Hz)
Options
Heater burnout alarm, Serial RS-485, Heating / Cooling control, Set value external selection, External setting input
Dimensions (mm)
22.5 W x 75 H x 100 D
Country of Origin
Made in Japan
Model Selection
| DCL-3 | |||||||
| Control action | 3 | PID | |||||
| Alarm | A | Alarm type can be selected by keypad | |||||
| Control output (OUT) | R | Relay contact: 1a | |||||
| S | 12VDC for SSR drive | ||||||
| A | mA current | ||||||
| Input | M | Multi-range: Thermocouple type K,J,R,S,B,E,T<N,PL-II,C. RTD: Pt100, JPt100. Current: 4-20mA, 0-20mA. DC Voltage: 0-1V, 0-5V, 1-5V, 0-10V |
|||||
| Power supply | 100-240VAC (standard) | ||||||
| 1 | 24V AC/DC | ||||||
|
Option (*) Heater burnout is not available for mA current control output type. |
W(5A) | Heater burnout alarm (5A) (*) | |||||
| W(10A) | Heater burnout alarm (10A) (*) | ||||||
| W(20A) | Heater burnout alarm (20A) (*) | ||||||
| W(50A) | Heater burnout alarm (50A) (*) | ||||||
| DC | Heating/Cooling control output OUT2 | ||||||
| C5 | Serial communication EIA RS-485 | ||||||
| EA | External setting input | ||||||
| EI | Set value memory external selection | ||||||
